- High heat phenolic bodies - Aluminum screw shell standard - 25?32� diameter over insulating lining - Available with brackets listed below - Snap-on paper liner per UL Standard 1571 - With #6-32, 3?8� head terminal screws backed out - 75W, 125V - cULus Listed

- High heat phenolic bodies - Aluminum screw shell standard - 25?32� diameter over insulating lining - Available with brackets listed below - Snap-on paper liner per UL Standard 1571 - With #6-32, 3?8� head terminal screws backed out - 75W, 125V - cULus Listed

- High heat phenolic bodies - Aluminum screw shell standard - 25?32� diameter over insulating lining - Available with brackets listed below - Snap-on paper liner per UL Standard 1571 - With #6-32, 3?8� head terminal screws backed out - 75W, 125V - cULus Listed

- Outer threaded phenolic body with special locking features to prevent body halves from misaligning - Molded skeleton type screw shell - Specify lead type, length and stripping - 75W, 125V - Sockets can be supplied with various hickeys and brackets - Can be supplied with phenolic rings in Black, Brown, Brass or Silver Plated, or Die Cast Brass or Silver - cULus Listed.

- Standard is IS104 Series - Has skeleton type contacts in molded phenolic threaded body riveted to bracket - 75W, 125V - Standard leads are 18 AWG 105 degrees Celsius, AWM-TEW plastic wire - SPT-1 wire available upon request - Specify length and wire type when ordering - On hickey or bracket with holes, leads are pulled through unless otherwise specified - IS104-S Series has aluminum screw shell with the same features as the IS104 Series - IS104-X Series has octagonal flange which allows easy installation in deep cups - UL Listed

- 3 piece phenolic body, base, cap and shell - Set screw terminals for wiring - Smooth shell to fit into cup - 1?8� IPS molded internal thread for mounting - Available with set screw on base to hold on to the 1?8� IPS pipe - Ratcheting locking base once assembled, will not come apart without depressing the lock release - Rated 75W 120W

- 3 piece phenolic body, base, cap and shell - Smooth shell to fit into cup - 1?8� IPS molded internal thread for mounting - Terminal: Screwless push-in terminals, suitable for #18AWG wire 12mm solder-dipped - Available with set screw on base to hold on to the 1?8� IPS pipe - Ratcheting locking base once assembled, will not come apart without depressing the lock release - Rated 75W 125W

- 3 piece phenolic body, base, cap and shell - Half outer thread on the body and shade ring are used to assemble a glass or reflector to the body - 1?8� IPS molded internal thread for mounting - Terminal: Screwless push-in terminals, suitable for #18AWG wire 12mm solder-dipped - Available with set screw on base to hold on to the 1?8� IPS pipe - Ratcheting locking base once assembled, will not come apart without depressing the lock release - Rated 75W 120W

- Phenolic intermediate base lampholder - Has skeleton type screw shell - The unit is supplied with wire leads, please specify wire length, type and end stripping - Also available with push-in terminals for adding your own leads - cULus Listed.

- Unglazed porcelain body with wireways - Available with deep wire well to meet UL AP requirements, specify part number IS211AP - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Standard leads are 18 AWG, EXL 125 degrees Celsius, 12� long, stripped 1?2� or specify desired length and type of wire - The above series are designed to accommodate a wide variety of hickeys or brackets, which can be ordered from the following pages - Insulating fibre cover or cap can be attached upon request - Also available with ground wire - Many configurations are available, as well as many mounting options - 660W, 250V - cULus Listed

- Unglazed porcelain body - Rust resistant spring tempered steel mounting clip riveted to body - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Available with male quick connect tabs, - Lampholders front mount into panel - Will accommodate 0.032� to 0.093� panel thickness - 660W, 250V - cULus Listed

- Unglazed porcelain body - Rust resistant spring tempered steel mounting clip riveted to body - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Available with male quick connect tabs, - Lampholders front mount into panel - Will accommodate 0.032� to 0.093� panel thickness - 660W, 250V - cULus Listed

- Unglazed porcelain body - Rust resistant spring tempered steel mounting clip riveted to body - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Available with male quick connect tabs, - Lampholders front mount into panel - Will accommodate 0.032� to 0.093� panel thickness - 660W, 250V - cULus Listed

- Unglazed porcelain body - Rust resistant spring tempered steel mounting clip riveted to body - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Available with male quick connect tabs, - Lampholders front mount into panel - Will accommodate 0.032� to 0.093� panel thickness - 660W, 250V - cULus Listed

- Unglazed porcelain body - Rust resistant spring tempered steel mounting clip riveted to body - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Available with male quick connect tabs, - Lampholders front mount into panel - Will accommodate 0.032� to 0.093� panel thickness - 660W, 250V - cULus Listed

- Unglazed porcelain body 1 11?16� high with 1 1?2� outer diameter - Spring brass centre contact - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Standard leads are 18 AWG, EXL 125 degrees Celsius, 12� long, stripped 1?2� or specify desired length and type of wire - Also available with screw terminals backed out and staked - specify part number IS2210-T when ordering = S/B IS2210-TA - Two #6-32 captive screws for mounting - Insulating cap IPS51 metal or ISP-53 phenolic available - cULus Listed

- Unglazed porcelain body 1 11?16� high with 1 1?2� outer diameter - Spring brass centre contact - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Standard leads are 18 AWG, EXL 125 degrees Celsius, 12� long, stripped 1?2� or specify desired length and type of wire - Also available with screw terminals backed out and staked - specify part number IS2210-T when ordering = S/B IS2210-TA - Two #6-32 captive screws for mounting - Insulating cap IPS51 metal or ISP-53 phenolic available - cULus Listed

- Unglazed porcelain body with wireway for side wiring - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Available with screw terminals or 18 AWG, EXL 125 degrees Celsius,12� long leads, stripped 1?2� - Can be supplied with any wire type - SVT and SJT 2 or 3 conductor wires are available for use with pendant fixtures - Available with 1?8� IPS die cast or Bakelite caps - Brackets are available with tapped holes or 1?8� IPS female extension - Supplied with adjustable metal or phenolic counter ring - cULus Listed

- One piece high heat phenolic body - U-shaped rust resistant tempered spring steel clip riveted into the body - Aluminum screw shell is standard. Brass or nickel-plated copper available to order - Lampholders can be supplied with any type and length of leads - Ground lead available upon request - Front mount into panel - Will accommodate 0.032� to 0.060� panel thickness - cULus Listed

- Unglazed porcelain body - Rust resistant spring tempered steel mounting clip riveted to body - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Available with male quick connect tabs, - Mount from back of panel - Ideal for use in recessed cans and pot lights - Will accommodate 0.032� to 0.093� panel thickness - 660W, 250V - cULus Listed

- Two piece heavy duty porcelain body - Mounts on 4� outlet boxes and have breakouts for 3 1?4� boxes - Mounting screws are provided - 2 backed out screws for easier wiring - Aluminum screw shell is standard - Standard colour is white - Rated 250W at 250V - cULus listed

- White glazed porcelain body - Copper alloy nickel-plated screw shell - Copper alloy nickel-plated centre contact - With screw terminals - Supplied with insulating fibre - Supplied with two captive #6-32 threaded bushings on 27?32� centres - Die cast caps are available - 660W, 600V - UL Listed

- White glazed porcelain body - Copper alloy nickel-plated screw shell - Has high dielectric construction with heat resistant mica insulator between screw shell and centre contact - Snaps in from the top of panel - Available with screw terminals, wire leads, or .250� x .032� male quick connect tabs - 660W, 600V - cULus Listed

- One piece phenolic body with standard male screw shell with reinforcing ring - Standard screw shell is aluminum. Brass or nickel-plated, brass available upon request - Adapter is available with or without leads - Standard wire leads are 18 AWG, TEW 105 degrees Celsius, 6� long, stripped 1?2� - Can be supplied harnessed to most sockets on request - 660W, 250V - cULus Listed

- One piece phenolic body with standard male screw shell with reinforcing ring - Has two ears on 19?32� centres for mounting - Standard screw shell is aluminum. Brass or nickel-plated, brass available upon request - Adapter is available with or without leads - Standard wire leads are 18 AWG, TEW 105 degrees Celsius, 6� long, stripped 1?2� - Can be supplied harnessed to most sockets on request - 660W, 250V - cULus Listed

- High heat phenolic body and cap 21?8� outside diameter by 11?32� overall height - Cap tightens to screw shell - Aluminum screw shell is standard - Concealed #6-32 screw terminals backed out for easy wiring - Provided with two #8-32 threaded brass bushings spaced on 1 7?32� centres for mounting - 660W, 250V - cULus Listed

- One piece porcelain body - Used to extend lamp in cans and when using Capsulyte halogen lamps - Extends lamp 1 1?4� longer - Standard screw shell is aluminum, nickelplated copper available upon request - 660W, 250V E - 26 - UL Listed

- Phenolic body with brass screw shell - Converts medium base to candelabra base - Simply screws into existing lampholder - Rated 75W 120V

- Brass screw shell - Converts intermediate base to candelabra base - Simply screws into existing lampholder - Rated 75W 120V

- Porcelain body with aluminum screw shell - Converts mogul base to medium base - Simply screws into existing lampholder - Rated 660W 250V

- Porcelain body with aluminum screw shell - Extends socket to create added clearance - Simply screws into existing lampholder - Rated 660W 250V

- High heat porcelain body - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Concealed screw terminals under ring - Mounts using two screws through base on 17?16� centres - Also available with wire leads - 660W, 250V - cULus Listed

- Glazed high heat porcelain body - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Screw terminals are standard with wireways at bottom of socket; also available with wire leads, specify type, length and stripping when ordering - Mounts using 2 screws through #8-32 holes in mounting ears - Also available with wire leads - 660W, 600V - cULus Listed

- High heat porcelain body - Two locking notches to prevent rotation - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Leads are 18 AWG, TEW 105 degrees Celsius, 9�long, stripped 1?2� - Other leads are available, specify type, length and stripping - Mounts into a 1 7?16� diameter hole in panel - 660W, 250V - cULus Listed

- High heat porcelain body - Slots available to protect against rotation - Aluminum screw shell is standard, brass or nickel-plated copper available to order - Also available with 0.250� male terminals or wire leads - Mounts into a 1 7?16� diameter hole in panel - 660W, 250V - cULus Listed

- One piece unglazed porcelain body with 1?8� IPS-27 NPS female bushing and set screw - The cap is keyed to the body to prevent rotation - Insulator assures isolation of the screw terminals - The screws are staked and backed out for fast and easy assembly - Standard screwshell is aluminum; brass or nickel-plated brass is also available - 660W, 250V - cULus Listed

- Two piece unglazed porcelain body joined through a steel strap with 1?8� IPS-27 NPS female bushing and set screw - Standard is aluminum screw shell - Screw terminals are standard - Screw terminals are staked and backed out for easy wiring - Also available with leads attached - 660W, 250V - cULus Listed

- One piece unglazed short body with 1?8� IPS-27 NPS female bushing and set screw on stamped steel cap - An insulator serves to isolate the cap from the screw terminals - Standard is nickel-plated copper alloy screw shell - Screw terminals are staked and backed out for easy wiring - 660W, 250V - cULus Listed

- Heavy duty phenolic body - Accepts no. 14 AWG stranded insulated wire - Ideal for stringing multiple lamps on the same conductors - The pin terminals pierce the insulation of the wire to provide a safe positive connection without stripping, bending or tightening screws. - Has an integral molded screw shell with skeleton type contacts - Rated 660W at 250V - cULus listed

- Two piece heavy duty phenolic body - Accepts no. 14 AWG or no. 12 AWG stranded insulated wire - Ideal for stringing multiple lamps on the same conductors - As the cap is screwed on, the pin terminals pierce the insulation of the wire to provide a safe positive connection without stripping, bending or tightening screws. - With plated steel wire hook - Has an integral molded screw shell with skeleton type contacts - Rated 660W at 250V - cULus listed

- Metal caps for porcelain sockets IS2210 and IS267 series - Has 1?8� IPS thread and screw set

- Metal caps for porcelain sockets IS2210 and IS267 series - Has 1?4� IPS thread and screw set